When Do You Need a PAS 128 Survey?
A PAS 128 survey is the recognised way to locate buried services before ground is broken. Here''s when you need one and which level is right for your project.
Striking a buried service is one of the most costly and dangerous things that can happen on site. Injury, delays, repair bills and reputational damage all follow. A PAS 128 survey is the industry-recognised way to reduce that risk — but when is one actually needed?
What is PAS 128?
PAS 128:2022 is the British Standards Institution specification for detecting, verifying and locating underground utilities. It sets out clear quality levels so clients know exactly how reliable the information they are working from is:
- QL-D: Desktop study of existing utility records
- QL-C: Site reconnaissance of visible features such as covers and valves
- QL-B: Detection using techniques such as GPR and electromagnetic location, graded B4 to B1 by confidence
- QL-A: Verification by physically exposing services through trial holes or vacuum excavation
Each level builds on the last. A thorough PAS 128 survey combines all four, giving you a complete picture of what lies beneath the surface before any ground is broken.
When do you need one?
You should commission a PAS 128 survey whenever ground will be broken and the location of services matters. Typical triggers include:
- Excavation, trenching and piling
- Site investigation boreholes and trial pits
- New drainage, connections or utility diversions
- Highway, rail and infrastructure works
- EV charger and foundation installations
- Early design stages, where accurate service data avoids costly redesigns later
Under CDM 2015, clients must provide relevant pre-construction information to designers and contractors. HSG47 guidance makes clear that utility records alone are not sufficient — they are frequently incomplete, inaccurate or out of date. A PAS 128 survey gives your project team information they can actually rely on.
The consequences of not commissioning one can be severe. A struck gas main, severed power cable or ruptured water main can halt a project for days, trigger emergency repair costs running into tens of thousands of pounds, and expose the client and contractor to serious legal and regulatory risk.
Which level do you need?
Not every project requires QL-A. The right combination of quality levels depends on your risk profile, programme and budget.
Design work typically starts with QL-D and QL-C to establish what records exist and what is visible above ground. QL-B detection follows for detailed subsurface mapping, using GPR and electromagnetic techniques to locate services that records may have missed or mislocated. QL-A — physical exposure — is reserved for high-risk locations where absolute certainty is essential before work proceeds.
A competent utility surveyor will advise on the appropriate scope for your specific project. Specifying too low a quality level leaves you exposed; specifying higher than necessary adds cost without proportionate benefit.
How ACUO can help
ACUO delivers PAS 128 utility surveys alongside GPR scanning and wider subsurface investigation, giving you clear, accurate data before work begins. Our reports are produced to the full PAS 128:2022 specification, with findings presented in a format your designers and contractors can act on immediately.
Whether you are at early design stage or about to break ground, we can advise on the right survey level and mobilise quickly across London, Kent, Essex and the wider South East.
Explore Topics
Written by
ACUO Structural Insights
Founder of ACUO Structural Insights and GPR NDT Civil Engineer with over 20 years of experience in non-destructive testing, structural investigation and subsurface survey.